PSPW150
The PSPW150 series of AC/DC power supplies provides 100 Watts of output power with convection cooling and 150 Watts with 12CFM forced airflow. This series consists of 12V, 15V, 19V, 24V, 28V, and 48VDC single output models with a 90-264VAC full range input which enables them to be used anywhere in the world. These supplies also feature a high efficiency up to 85% and a power factor > 0.9 at 115/230VAC. These supplies are also protected against short circuit, over voltage, and over load conditions. The PSPW150 series has UL60950-1, CSA-C22.2 NO.950-1, Nemko EN60950-1, and CB IEC60950-1 safety approvals. This series is also CE marked and meets EN55022 Class B, CISPR22 Class B, and FCC Part 15 Class B EMC standards. Both open frame and U-chassis mechanical options are available for this series.
| Model Number |
Input Voltage |
Output Voltage |
Output Current |
Output Power (W) |
No. Outputs |
Case | Size | |
|---|---|---|---|---|---|---|---|---|
| PSPW150B-1Y12-x | Input Voltage: 90~264 | Output Voltage: 12 | Output Current: 12.5A | Output Power (W): 150 | No. Outputs: S | Case: Open Frame, U-Chassis | Size: 4" x 2" x 1.14" | Get a Quote |
| PSPW150B-1Y15-x | Input Voltage: 90~264 | Output Voltage: 15 | Output Current: 10A | Output Power (W): 150 | No. Outputs: S | Case: Open Frame, U-Chassis | Size: 4" x 2" x 1.14" | Get a Quote |
| PSPW150B-1Y19-x | Input Voltage: 90~264 | Output Voltage: 19 | Output Current: 7.89A | Output Power (W): 150 | No. Outputs: S | Case: Open Frame, U-Chassis | Size: 4" x 2" x 1.14" | Get a Quote |
| PSPW150B-1Y24-x | Input Voltage: 90~264 | Output Voltage: 24 | Output Current: 6.25A | Output Power (W): 150 | No. Outputs: S | Case: Open Frame, U-Chassis | Size: 4" x 2" x 1.14" | Get a Quote |
| PSPW150B-1Y28-x | Input Voltage: 90~264 | Output Voltage: 28 | Output Current: 4.16A | Output Power (W): 150 | No. Outputs: S | Case: Open Frame, U-Chassis | Size: 4" x 2" x 1.14" | Get a Quote |
| PSPW150B-1Y48-x | Input Voltage: 90~264 | Output Voltage: 48 | Output Current: 3.12A | Output Power (W): 150 | No. Outputs: S | Case: Open Frame, U-Chassis | Size: 4" x 2" x 1.14" | Get a Quote |
| Specification | Value |
|---|---|
| Input | |
| Input Voltage (Nominal): | 115/230 |
| Input Voltage Range: | 90~264 |
| PFC: | > 0.9 at 115/230VAC |
| Input Frequency: | 47-63Hz |
| Output | |
| Output Voltage: | 12, 15, 19, 24, 28, 48 |
| Output Current: | 12.5A, 10A, 7.89A, 6.25A, 4.16A, 3.12A |
| Output Power (Watts): | 150 |
| Short Circuit Protection: | Automatic Recovery |
| Over Voltage Protection: | Automatic Recovery |
| General | |
| Efficiency: | 85% |
| Environmental | |
| Operating Temperature: | Convection: 0 to 60°C with derating; 12CFM Forced Air: 0 to 70°C |
| Storage Temperature: | -10 to 85°C |
| Physical | |
| Weight: | Open Frame Models: 7.27oz (206g) U-Chassis Models: 9.70oz (275g) |
| Dimensions: | Open Frame Models: 4.00" x 2.00" x 1.14" (101.6 x 50.8 x 29.0 mm) U-Chassis Models: 4.12" x 2.25" x 1.38" (104.6 x 57.0 x 35.0 mm) |
| Notes & safety | |
| Notes: | 1. There are two types of mechanical options available for this series. The suffix on the end of the model number indicates the package type. The suffix "-O" is for open frame type and the suffix "-U" is for U-chassis type. 2. The output power and output current values listed in the table on the "Models" tab is the maximum value with 12CFM forced air. For convection cooling values pease see the data sheet. 3. This product is Listed to applicable standards and requirements by UL. Due to advances in technology, specifications subject to change without notice. |
| Safety Approvals: | UL60950-1, CSA-C22.2 NO.950-1, Nemko EN60950-1, CB IEC60950-1 |
| RoHS Compliance: | Yes |
Get a Quote
Request information for from Wall Industries.
"*" indicates required fields
Medical Power Supplies
Military Power Supplies
Railway Power Converters
Lighting Power Supplies
Industrial Power Supplies
Level VI Power Supplies
Custom Solutions
Wall Industries, Inc. offers fully custom power design capabilities. Our team of electrical and mechanical power design engineers will utilize proven design topologies and concepts to create a solution to your power requirements. If you don’t have a specification, Wall’s engineering team will assist you in determining what your requirements are and how best to provide a solution.
Custom Power Supplies